Embedded Files
Share your requirements on
LOW VOLTAGE STANDOFF INSULATORS
Insulator is the special part to fix, install, and insulate on communication, electric power, lightning protection, machinery, medical, wind energy, frequency conversion equipment, and new energy vehicles (integrated chassis cabinets, lockers, etc.) to meet the fixed support, installation, and insulation isolation effect of special parts.
Insulators are made of materials pressed by moulds. It is also known as insulators or insulation columns. Its appearance is usually the Cylinder, Hexagonal, Round.There is the insert on the two surfaces of the insulator.
EPOXY RESIN HT / MV INSULATOR RANGE
DMC HT / MV INSULATOR RANGE
Material: Fibreglass / SMC / DMC, self-extinguishable or UV material are on request.
Resistance against rusting and corrosion by chemical or atmospherical condition.
Easy to machine/ easy to move around and install because of its lightness.
Door hinges allows more than 180° opening.
Door with lock system, enclosure, wall mount brackets 4pcs/set.
Mounting plate to be supplied separately as to the clients request.
Working temperature: -40 to +120 degree.
Surface treatment: painted with epoxy polyester coating.
Advantages:- Excellent resistance against chemicals.
Ftth Frp Grp Ip66 Flame Retardant Insulation Fiberglass Smc Reinforced Polyester Distribution Enclosure Box Electrical Cabinet - Buy Waterproof Outdoor Ip66 Fiberglass Smc Cabinet distribution Enclosu.mp4TTC Metal enclosure made from a continuo length of sheet double folded at the front, with back welded to the frame. Both externally and internally protected with polyester epoxy resin Grey paint to RAL7032 or RAL7035 texturised.
Material : Sheet Steel | Enclosure:1.2mm ,1.5mm | Door:1.2mm ,1.5mm | Mounting plate: 2.0mm .
Surface finish : Enclosure and Door: Dip-coat, powder-coated in textured Ral7032 or Ral7035 outside.
Mounting plate : Galvanized steel or sheet steel to paint in RAL2004/RAL7032.
Protection : Protection degree : IP66
Impact Resistance : IK10
Supply includes : Enclosure and Door, Mounting Plate, Lock System, Gland Plate, Sealing Gasket, and fixing accessories.
PVC WIRING DUCTS
TTC Slotted cable trunking made of PVC according to DIN EN 50085-2-3 for installation in switch cabinets, base with slotted side walls and with single-row base perforation according to DIN EN 50085-2-3, overlapping cover with a continuous labelling edge. The side bars can be broken out without tools, with the aid of notching pliers the side bars can be broken out down to the base. The wiring duct is VDE-tested and CSA-certified.
PVC HEAT SHRINKABLE SLEEVES
We are engaged in offering Bus Bars PVC Heat Shrink sleeves to the clients that are widely used across the globe due to their high insulation. These Bus Bars PVC Shrink Sleeves find extensive usage in Control panel boards, Switch-gears, Distribution boards, etc.
TTC INDIA Rapidly Soft Black Pvc Heat Shrink Sleeve Shrinkable Tube For Jacketing Applications Shrink Sleeve - Buy Pvc Tube Shrink Sleeve pvc Heat Shrink Tube Shrink Sleeve pvc Tube 45mm Shrink Slee.mp4
TTC MCB CHANNEL / TTC DIN RAILS.
TTC BRASS/POLYAMIDE CABLE GLAND.
TTC PAN ASSEMBLIES / SHROUDED DB
PRODUCTS VIDEOS GALLERY
DMC INSULATORS.mp4COPPER GROUNDING INSULATOR.mp4COPPER GROUNDING
MV INSULATOR.mp4SMC BOX.mp4Google Sites
Report abuse