DIN RAIL PAN ASSEMBLY

Din rail Pan assembly Three phase 250A 200A 125A MCB Pan assembly Main Busbar upto 250A 50/60Hz Compact design.

Din rail Pan assembly Rated current: 125; 200; 250A .Din rail Pan Assembly Pan assembly is a kind of busbar with shrouded, designed for simple, quick and complete integration

into custom built enclosures. They are highly welcome by the panel builder, and electrician in the electric power distribution.

Standards: IEC 61439 -2

Rating current: this model was divided into 3 frames by different thickness copper used.

250A 3.0 mm;

200A 2.0mm;

125A 1.5mm

Operating Voltage: 400/415V

Frequency: 50/ 60Hz

Incomers: Free be designed/can be MCB, ISOLATOR, MCCB, WIRING

Outgoing: branch mounted on the rail of the base. The rail of the base can be designed according customer’s inquiring,

Suitable for mounting in separate enclosure

No. of ways: 4,6,8,10,12,14,16, 18,20,22,24W

No. of phase: this model Pan assembly busbar also can make in single phase, and two phase.

Fully shrouded continuously rated copper busbar

One piece (no welds or rivets) phase busbars to eliminate the risk of hot spots

Accepts 6kA, 10kA and 15kA MCBs and flying lead RCBOs.

1. Fire-proof material for the isolation case

2 .Incoming switch: 3Phase Mcb, Isolator, Elcb, MCCB up to 250A

3 .Outgoing: upto 72poles way any kind of MCB

4 .Installation base as required: according different brands branch and main breaker, adjust the position of the rail and bracket

. Base can be fabricated separately for branch, and main-breaker

5 .Smaller design

6. Outgoing MCB in 18mm interval: any kind of MCBs

7. Main copper bar and branch bar fabricated as one part

8. According different main breaker make the suitable connection link.

Copper bar thickness2.0MM2.5MM/3.0MM , match different type Main breaker

 Plug-in Type Pan Assembly Busbar Distribution Systems 

• Rating: Thismodel was divided into three frames according to the use of different copper thicknesses: 100A, 2.5mm

• Operating Voltage:400/415V

• Frequency:50/60Hz

• Incomers:Free be designed/can be MCB,ISOLAOTR,MCCB,WIRING

• Outgoing: Attach the branch to the base rail. The base rail can be designed according to customer requirements. Suitable for installation in a separate housing. New 24-way options (TP) in 4, 6, 8, 12, and 18.

• One piece (no welds or rivets)phase busbars to eliminate the risk of hot spots

• Fire-proof material for the isolation case

• Incoming switch: 3P MCB, Isolator, MCCB up to 250A

• Outgoing: up to 72poles way, in 25mm interval: any kind of plug-in MCB

• Installation base as required: can be fabricated separately for branch, and main breaker

• Main copper bar and branch bar fabricated as one part

• According different main breaker make the suitable connection link.